MediaRange MR748 Benutzeranleitung Seite 10

GB Getting started and operation
1. Please check the power level of the powerbank before charging your
device. The LED indicator will show the current power level by pushing the
function key for a second:
1
2. Connect your device, or your devices, to the powerbank for charging.
The powerbank starts charging automatically. In case that the powerbank
does not charge automatically, please keep the function key pushed for a
second to start charging.
2.1
Note: The maximum output power of the powerbank is limited to 5.0A. If your
connected devices require a higher output, the powerbank does not start to charge.
Please charge your devices individually then.
2.2
Power level:
100 - 76%
Power level:
75 - 51%
Power level:
50 - 26%
Power level:
25 - 1%