Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3. Then push the spring washer (6) from the under-
side of the module onto the fastening screw (1)
and fasten the nut (7).
5 Care and maintenance
Check your solar generator approx. every three years
for soiling. This occurs especially on the lower edge
of the modules and forms a haze that cannot be
washed off even by heavy rain.
In the event of significant dirt build-up we recom-
mend cleaning the glass surface. Use plenty of
lukewarm water and a soft brush. This prevents loss
of yield.
CAUTION
Do not use strong cleaning agents and metallic
objects, in order to avoid damage to the hardened
glass surface!
Occasionally check the cables for damage, corrosion
and make sure they are secure.
6 Module parameters
The electrical parameters can be found in the cor-
responding module datasheet.
7 Declaration of conformity
EU declaration of conformity
Relevant EC Directives
·
Directive 2006 / 951 / EG / EC
·
Directive 89 / 336 / EWG (EMV Directive)
·
Directive 93 / 68 / EW (Low-Voltage Directive)
Sunways AG, Macairestraße 3-5, 78467 Konstanz,
Germany declares under its sole responsibility
that the solar module types listed above meet the
requirements of the following standards
·
DIN EN 50178 - 1994
·
EN 50081-1 (2)
·
EN 50082-1 (2)
·
DIN VDE 0101
·
DIN VDE 0110
·
DIN EN 61215:2006; EN 61215:2005-08
·
DIN EN 61730-1:2007-10; EN 61730-1:2007-05
·
DIN EN 61730-2:2007-10; EN 61730-2:2007-05
·
IEC 61215 (ed.2)
·
IEC 61730-1 (ed.1)
·
IEC 61730-2 (ed.1)
and therefore comply with the EC Directives listed
above.
Roland Burkhardt, CTO
DE
EN
15
Werbung
Inhaltsverzeichnis
