OJ Electronics WLRC3-19 Schnellstartanleitung

I N S T R U C T I O N S
Waterline Receiver for Wireless Operation
67343A 03/17 (HKT)
English
Product programme
WLRC3-19 Receiver
Connection of master and receiver
The receiver is connected to the master or the add on module by means of
a RJ45 tele-connector no 4.
Using the special cable supplied with the receiver, connect the tele-
connector to the master and the four wires to the receiver.
The max. distance between the master/add-on module and receiver is 30
m. Up to 5 receivers can be connected. The master, add-on module and
receiver can be connected either in a daisy chain or in parallel.
Fig. 1 Master
WLRC3
Fig. 1 Removing the front cover
Connection label
B A -
Blue Red Brown
BR1026A12a
© 2015 OJ Electronics A/S
Mounting of receiver
Do not place the receiver inside a metal box. In case of communication
problems it may be necessary to move the receiver to a new location or to
add an additional receiver.
• English
• Polski
• Norsk
• Deutsch
WLM3 - Master
+
Yellow
Master
A WLM3-BA or WLM3-FS master can be used. Connect the receiver to the
master, and the system will reconfigure itself for wireless operation.
System setup
For information on setting up the system, please refer to the Installation
Quick Guide supplied with the master.
Maintenance
The unit is maintenance free.
Certifications
CE marking
OJ Electronics A/S hereby declares that the product conforms with the
following Directives of the European Parliament and of the Council:
• EMC - electromagnetic compatibility
• R&TTE - Radio Equipment and Telecommunications Terminal Equipment
and the mutual recognition of their conformity
• RoHS - restriction on the use of certain hazardous substances
• WEEE - waste electrical and electronic equipment
Applied standard(s)
EN 61000-6-2, EN 61000-6-3, EN 300 220-1, EN 300 220-2, EN 301 489-3,
EN 301 489-1, EN 50371
Disposal and recycling
Recycling of packaging
Protect the environment by disposing of the packaging in accordance with
local regulations for waste processing.
Disposal of the product
Equipment containing electrical components must not be
disposed of together with domestic waste.
It must be collected separately along with other electrical
and electronic waste according to local and currently valid
legislation.
Technical Specifications
Purpose of control
Connection type . . . . . . . . . . . . . . . . . . 24 V DC, Standard RTU Modbus ®,
Cable type . . . . . . . . . . . . . . . . Communication cable with RJ14 connector
Cable length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Max. 30 m
Ambient operating temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0/+40°C
Power drain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Typically 30 mA
Communication frequency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 868.3 MHz
Communication distance . . . . . . . . . . . . . . . . . . . . . . . . . . Up to 30 m inside
Mounting method . . . . . . . . . . .For mounting direct on wall or in wall socket
Enclosure rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IP 21
Dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . H/86.0, W/86.0, D/25.5 mm
© 2017 OJ Electronics A/S
. . . . . . . . . . . . . . Receiver for signals from wireless units
used to control hydronic floor heating and cooling
RS-485 communication
Up to 100 m outside
1