Special Functions; Forced Settings In Programme Mode - Grundig Chassis G1 Servicehandbuch

GRUNDIG Service GRUNDIG Service
3.2.3 Remote Control
Call up the "Remote control" menu via "EASY DIALOG" –> "Instal-
lation" –> "Dealer service menu" –> Code number "8500" –> "Hard-
ware equipment".
Select "TP100/TP110", "TP150", "TP140" or "PR11".
3.2.4 Front S-VHS Jack
Call up the "Front S-VHS Jack" menu via "EASY DIALOG" –> "In-
stallation" –> "Dealer service menu" –> Code number "8500" –>
"Hardware equipment".
Select "Yes" or "No".
3.2.5 Subwoofer
Call up the "Subwoofer" menu via "EASY DIALOG" –> "Installation"
–> "Dealer service menu" –> Code number "8500" –> "Hardware
equipment".
Select "Yes" or "No".
3.2.6 Front-LED
Call up the "Front-LED" menu via "EASY DIALOG" –> "Installation"
–> "Dealer service menu" –> Code number "8500" –> "Hardware
equipment".
Select "3 Colors" or "1 Color".

3.3 Special Functions

3.3.1 Watchdog
Call up the "Watchdog" menu via "EASY DIALOG" –> "Installation"
–> "Dealer service menu" –> Code number "8500" –> "Special
functions".
If the Watchdog timer is not reset in regular intervals, a new start is
initialized.
Set the Watchdog to "Off" or "On".
3.3.2 IR Data Programmer
Call up the "IR-Data programmer" menu via "EASY DIALOG" –>
"Installation" –> "Dealer service menu" –> Code number "8500" –>
"Special functions". Using the "OK" button, it is possible to store up
to 99 programme positions with data for channel, TV standard, Peri,
6-position station name, centre fine tuning, and "0" volume offset,
with the help of the IR data programmer.
3.3.3 AGC Setting
Call up the "AGC setting" menu via "EASY DIALOG" –> "Installati-
on" –> "Dealer service menu" –> Code number "8500" –> "Special
functions".
Adjust the value so that the picture is just free of noise (see Align-
ment, Point 3).
3.3.4 Cancel EPG Flash
Call up the "Cancel EPG flash" menu via "EASY DIALOG" –> "In-
stallation" –> "Dealer service menu" –> Code number "8500" –>
"Special functions".
Pressing the "OK" button will clear the EPG Flash.
3.3.5 Teletext Level 2.5 Support
Call up the "Teletext level 2.5" menu via "EASY DIALOG" –>
"Installation" –> "Dealer service menu" –> Code number "8500" –>
"Special functions".
Select "Yes" or "No".
4. Sound Settings
Press the "blue" button to call up the "Sound" menu.
The settings "Speech", "Music" or "Manual" can be selected in the
"Defaults" menu.
The "Manual" setting allows you to adjust the sound to suit your ta-
ste. For the other settings, specific values are preprogrammed.
5. Picture Settings
Press the "red" button to call up the "Picture" menu.
In the "Defaults" menu, the settings "Day", "Night", and "Manual"
can be selected.
With the "Manual" option, you may set the contrast and the picture
sharpness. For the other settings, specific values are preprogram-
med.
6. Settings via the Channel Allocation

6.1 Forced Settings in Programme Mode

Call up the "Sound channel" menu via "EASY DIALOG" –>
"Preset List" –> "green button" –> "Edit channel settings".
You may select between "Automatic", "Mono", "Mono B" and
"Mono C".
Mono B = Original sound track
Mono C = For digital sound reception (Nicam).
7. Factory Settings
Press the " i ", "red" and "OK" buttons to call up the factory settings.
1 - 10 1 - 10
Chassis G1 Chassis G1