Velleman VTFC Bedienungsanleitung Seite 5

Due to constant product improvements, the actual product appearance
•
might differ from the shown images.
Product images are for illustrative purposes only.
•
Do not switch the device on immediately after it has been exposed to
•
changes in temperature. Protect the device against damage by leaving
it switched off until it has reached room temperature.
The appliance is only to be used with the power supply unit provided
•
with the appliance.
Keep this manual for future reference.
•
4. Features
multipurpose hot-wire foam cutting tool with 3 interchangeable tips: hot
•
wire tip, engraver tip and hot knife tip
quick heat-up feature and safety stand
•
highly suitable for cutting all types of polystyrene foam
•
ideal for decorative molding, hobby craft projects, contouring foam for
•
prototypes and DIY foam packing
5. Overview
Refer to the illustrations on page 2 of this manual.
1 tip-handle connection
2
power adapter
6. Operation
1. The appliance is only to be used with the power supply unit provided
with the appliance.
2.
Draw the design on the piece of foam, either freehandedly or using a
pattern.
3.
Choose one of the included tips and insert it into the handle. Ensure it
is well-secured into the handle.
4.
Connect the plug coming from the handle to the adapter. Insert the
adapter into the mains socket.
5. Switch on the foam cutter and place it onto the stand. Wait for the
cutter to warm up.
6. Hold the cutter in a comfortable position. Always try on a test object
before starting on your project. Remove large unwanted chunks first
for easier handling.
7.
We recommend using the wire tip for more detailed work. Do not use
force to cut the foam and let the heat do the work.
8.
After cutting, switch off the foam cutter and let it cool down on the
stand before storing.
V. 03 – 30/06/2016
VTFC
3 cutting wire
5 ©Velleman nv