GPO Brooklyn Anleitung Seite 7

S e t t in g t he LE D c lock
When the unit is on standby, a 24 hour LED clock will be displayed for
10 seconds if you press the menu button on the front of the unit.
The time can be set on the clock whilst the unit remains in standby
mode:
1. Press and hold the central part of the Search Knob on the front of
the unit for two seconds
2. The hour value on the clock will be highlighted
3. Change the hour by turning the central part of the Search Knob
clockwise to move the hour forwards or anti-clockwise to move the
hour backwards
4. Press search again to accept the hour and highlight the minute value
5. Change the minute by turning the Search Knob clockwise or anti-
clockwise
6. Press the Search Knob a final time to confirm the time
GPO_Brooklyn_Manual EU - Oct 2017_v1.indd 7
7
18/10/2017 09:27