Yamaha SPM-K30 Installationsanleitung Seite 11

4 Attach the safety wire.
Attach the safety wire to the small wall mount bracket to prevent the Digital Sound Projector from falling.
Safety wire
5 Mount the Digital Sound Projector on the wall.
Fit the mounting guide hooks of the small wall mount brackets attached to the Digital Sound Projector into the holes on
the left and right sides of the large wall mount bracket and then slide the unit to the right.
Note
Hold the Digital Sound Projector tight with both hands when attaching or removing the Digital Sound
Projector to or from the wall. Holding the Digital Sound Projector loosely could cause the Digital
Sound Projector to fall, resulting in personal injury.
INSTALLATION PROCEDURE
Slip one end
through the loop
at the other end
Slip the safety wire
between the bracket
and the projector
Repeat the same
procedure for the
other bracket.
Fit the hook into the
hole.
Slide the unit to the
right.
En 7