Holux M-215 Schnellstartanleitung Seite 3

•
Mini GPS viewer (Testing tool)
For further information, please read the user's manual in the supplied CD.
When the GPS connection is working normally, the
status lamp indicates the status by a flash 1 time/1
sec.
You can install the Mini GPS viewer program from the
supplied CD to check current positioning and satellite
signal reception.
Enable the Mini GPS viewer, set the Baud rate to
4800, and press Scan for automatic scanning. Once
you find the correct Com Port, choose GPS Status to
start viewing.
Refer to the "Software Installation" section for details
if you have any difficulty with installation and use.