Panduit CT-2980/L Bedienungsanleitung Seite 5

An incomplete crimp can cause a fire.
Use proper connector and cable combinations. Improper combinations can result in an incomplete
crimp.
The relief valve will sound to indicate a completed crimp. If you do not hear the sound of the relief
valve, the crimp is not complete.
Inspect tool before use. A worn or damaged tool may result in breakage striking the operator or
nearby personnel.
Do not perform any service or maintenance other than as described in this manual.
Injury or damage to the tool may result.
Do not place the tool in a vise. The tool is designed for hand-held operation.
Protect the tool from rain and moisture.
Use this tool for the manufacturer's intended purpose only.
Before crimping a connection, verify that the tool top on the tool head is locked in the closed position.
The lockout pin must be engaged completely through the tool head and both surfaces of the tool top.
Failure to lock the tool top in the closed position may result in damage to the tool and personal injury.
OPEN
POSITION
CT-2980/L & CT-2980/LE_ENGL
CT-2980/L and CT-2980/LE ENGLISH
WARNING
CAUTION
CAUTION
CLOSED
POSITION
PA26011A01_02 Page: 4 of 58 3-2012