Programming Instructions - Fracarro SIG7720 Betriebsanleitung

The SIG7720 module programming is carried out in 2 consecutive steps:
1. using the universal TPE programmer, to select mainly the network parameter (IP, NETMASK,
GATEWAY, etc) refer to the user's instructions of the universal programmer and the SIG7720 GEN-
ERAL MENU;
2. though the local connection between the module and PC. To carry out the local connection to
the module and enter all the configurations through the integrated web-browser interface, use a PC
with a network adapter (Ethernet card) and an Ethernet CAT-5E crossover cable – refer to the PRO-
GRAMMING INSTRUCTIONS – SIG7720 WEB MANAGEMENT PROCEDURE).

5. PROGRAMMING INSTRUCTIONS

SIG7901
01
HEAD
Line
Freq. In 1204
Lev Out 15
FRACARRO
PENTA85
SIG7901
01
HEAD
Line
PENTA85
FR
SAT
R
L
V SIG7720
HEAD-Line
SIG7100
IP
HEAD-Line
A A V
SIG7100
FR
SAT SAT
R R
L L
SIG7720 SIG7720
V V
HEAD-Line HEAD-Line
SIG7100 SIG7100
IP IP
HEAD-Line HEAD-Line
A A V A A
SIG7100 SIG7100
27
SIG7720
SAT
R
L
SIG7720 V SIG7720
SIG7720
HEAD-Line
HEAD-Line
SIG7100 HEAD-Line
IP IP IP
HEAD-Line
A A V
SIG7100
SIG7720
SIG7720 SIG7720
HEAD-Line HEAD-Line
IP IP
V
PC