BeeWi BBS300 Bedienungsanleitung Seite 7

7
Power Off: slide the power switch down, the blue LED indicator will turn
off.
2.3 Pair and connect
Refer to the Bluetooth pairing procedures in the mobile phone or music
player user manual.
When the device is on, long press the mFB button for about 6 seconds
until the blue indicator remains steady blue, then release the button. The
product is in the pairing mode.
Search for Bluetooth devices in the phone, select the device name "BeeWi
BBS300" displayed on the phone and eventually enter the pass key
"0000" to add the device to the pair list and establish the connection.
Check the connection by placing a call or playing the music from your
phone.
2.4 Connection
The speaker will automatically connect to the last connected device when
it will be turned on. If it is not the case, just connect and disconnect the
speaker from the mobile phone the first time (refer to the phone user
manual). It will then connect automatically the next times.
When using both Hands-Free and music profiles, hands-free will
always have the priority, the music being muted in case of incoming or
outgoing calls. As soon as the call has been hung up, the music rebounds
afterwards.
Note: If the mobile phone supports only Headset profile, the connection
will be established automatically when a call is made (refer to the phone
user manual).
2.5 In car use
Slide the speaker in the holder and clip it on the car visor above.
For better voice pick up, direct the microphone towards the user and do
not place the speaker on interior dashboard or close to a window, air
conditioning vent or car speakers.
ENGLISH