Community Playthings G112 Community-Krippenbett Anleitung Seite 3

Assembly
Your cot comes packed in a single carton.
No tools are required for assembly.
Assembly is easiest with two people.
1
Lean one Cot End against wall.
3
Hang second Cot Side on hinge pins.
5
Open assembly until square.
Cot
End
Cot Side flat
against Cot End
2
Second Cot Side
flat against wall
Cot Side
4
6
Hang one Cot Side on hinge pins.
Add second Cot End. Lean Cot End
flat against Cot Sides.
Add Cot Bottom with latches down.
Insert latches into holes in uprights.
Cot
Side
Press both top rails
onto hinge pins.
Cot
End
First, insert these
two latches into
holes in uprights.