How To Replace The Turntable Stylus (Needle) - Vintage Vinyl VV-SV-TT Serie Bedienungsanleitung

HOW TO REPLACE THE TURNTABLE STYLUS (NEEDLE)

Removing the Stylus from the Cartridge
• Place a screwdriver at the tip of the stylus and push downward as shown in direction
• Remove the stylus by pulling the stylus forward and pushing downward.
Installing the Stylus
• Hold the tip of the stylus and insert the stylus by pressing as shown in direction
• Push the stylus upward as in direction
TIPS TO BETTER TURNTABLE PERFORMANCE
• When opening or closing the turntable cover, handle it gently, gripping it either at the
center or at each sides.
• Do not touch the needle tip with your fingers; avoid bumping the needle against the
turntable platter or record edge.
• Frequently clean the needle tip-use a soft brush in a "back-to-front' motion only.
• If you must use a needle cleaning fluid, use very sparingly.
• Gently wipe the dust cover and turntable housing with a soft cloth. Use only a small
amount of mild detergent to clean the turntable and dust cover.
• Never apply harsh chemicals or solvents to any part of the turntable system.
All contents and specification mentioned in this manual are subject to change without prior notice
All brand / company names, logos and trademarks referenced in this manual are the property of their respective owners
Our products including the packaging are not toys and they might contain small parts and sharp objects. Please keep away from children
until the stylus locks into the tip position.
C
.
A
.
B
EN 05