ION PRO80 AUTOMATIC Anleitung Seite 4

Features
Top Panel
1. Platter: Place the slipmat here, and
then place your record on the
slipmat.
2. Tonearm: The fixed tonearm can be
raised and lowered by hand, or by
using the Raise / Lower Lever.
3. Arm Clip: This specially designed
arm clip secures the tonearm when
not in use.
4. Raise / Lower Lever: Use this to
raise and lower the tonearm on the
record.
5. Counterweight: This is pre-balanced
to provide proper tracking for the
stylus.
6. 7"/12" Switch: Adjust this switch to select whether you are using either a 7" or 12" record.
7. 45 RPM Adapter Holder: Holds the included 45 RPM adapter. When not using the
adapter, please place it in this holder.
Front Panel
1
1. 33/45 RPM Selector: Adjust this to select the RPM of the turntable platter based on the
type of record you are using.
2. Start/Stop: Press Start to have the tonearm automatically lift, swivel over the record, and
drop the needle at a specific spot based on the 7"/12" Switch setting. When a record
reaches the end or if Stop is pressed during playback, the tonearm will automatically lift
and return to the resting position.
4
7
1
5
4
3
2
6
2