Charging The Headphones - Gioteck FL200 Bedienungsanleitung

CHARGING THE HEADPHONES

1] To charge the Headphones, use the supplied USB cable and insert into
any powered USB Port. Normal charging process takes 2-3 hours.
2] The red LED on the left Earcup will turn on when charging
and will turn off when charging is complete.
3] Make sure the battery has been fully charged and fully released
at the first three times of use to ensure the battery the best
performance. After charging is complete, please remove the cable
from the Headphones and the USB Cable from the USB port.
Do not keep the Headphones connected to the USB port for a long time
when charging complete as this will shorten the lifetime of the Battery.
5 6