Inhaltsverzeichnis
Werbung
Four illuminated LEDs: Charged between 76-100%
Three illuminated LEDs: Charged between 51-75%
Two illuminated LEDs: Charged between 26-51%
One illuminated LED: Charged between 1-25%
No illuminated LEDs: Powerbank is empty.
Start charging:
To charge your device, connect it to the USB-A port on the
Powerbank using the cable included (or a device-specific charging
cable). The powerbank starts charging your device automatically. In
case that the powerbank does not charge your device, please press
and hold the power button for a couple of seconds to start charging.
Stop charging | Switching off the Powerbank
To stop charging, unplug the charging cable from the device and
the powerbank. If all devices are unplugged or if your device is fully
charged, the Powerbank switches off automatically.
Using the built-in LED torch
To use the torch, please press the torch icon on the power button.
The LED torch turns on. Press the torch icon again to turn of the
torch.
Warranty
MediaRange GmbH assumes no liability and provides no warranty
for damage resulting from improper installation/mounting,
improper use of the product or from failure to observe the
operating instructions and/or safety instructions.
Support service
if you have any questions about our Powerbanks, please contact
MediaRange Support Service:
Tel.: +49 (0) 6196 523 81 80 or E-Mail: info@mediarange.de
Werbung
Inhaltsverzeichnis
