Power Sources - LEXIBOOK BT600series Bedienungsanleitungen

The Mini Bluetooth® tower operates with the micro USB charging cable (included)
or with a USB type adaptor (not included) 5V, 1A. Input: 100 ~ 240V, 50/60 Hz.
Power supply
1. Check that the unit is switched off.
2. Insert the small end of the micro USB cable (included) into the micro USB
charging port on the back of the unit.
3. Connect the other end of the micro USB cable into the USB port of your powered
computer or USB type power adaptor and connect it to a wall socket. The LED
near the micro USB charging port lights up in red when the device is charging.
4. Once loading complete the LED light will turn off.
Note: Please note that the micro USB cable can be used for battery charging only
and not for data transfer.
The micro USB cable can be used for charging during playback.
WARNING:
- Risk of explosion if battery is incorrectly replaced. Please only replace it with an
identical or a similar battery.
- The battery should not be exposed to high temperatures, such as sunlight, fire
or anything similar.
- Significant electromagnetic interference or electrostatic discharges may cause
the device to malfunction or lose data. If the device is not functioning correctly,
switch it off and then on again, or unplug the USB cable.
BT600series_IM_1296_101_V21.indd 13

POWER SOURCES

13
20/7/16 7:01 pm