Cleaning And Maintenance - Overmax Home Aspiri Robo Bedienungsanleitung

3. Brushes
• To remove the main brush, take the cover and brush out.
• To fix the main brush, insert it into the vacuum cleaner. Make sure the holes on both sides
match, and then apply the cover.
4. Side brushes
• Side brushes must be attached from the bottom of the cleaner to dedicated spots.
• To clean side brushes, take them out and wipe with a dry cloth.

CLEANING AND MAINTENANCE

Before you clean the vacuum cleaner and its elements, switch it off.
1. Clean the vacuum cleaner with a dry cloth.
2. Remember to wipe any sensors and battery charging contacts with a cloth after every use
(it applies to elements in the cleaner and docking station).
3. Accessories and filters cleaning has been described in previous chapter.
4. When you do not use the vacuum cleaner for a long time, remove the battery.
LED
The vacuum cleaner is equipped with a signaling LED which indicates the mode of the device:
1. Charging – purple light pulsates.
2. End of charging – blue light glows.
3. Standby – blue light flashes.
4. Cleaning mode – blue light glows.
5. WIFI selection mode – blue light flashes fast.
6. Error – red light flashes.
7. Low battery – red light glows.