oneConcept Growbox Bedienungsanleitung Seite 8

Each type comes with low and flat
3
ceiling tubes. The quantity depends
4
4
on the size of the item. Please resort
to the list of the components. Sev-
eral variations are possible. The most
4
4
common method is connecting the
the tubes from the left to the right
with the low tubes on the ends and
the flat tube in the middle.
4
Low ceiling tubes are designed to fix
objects such as carbon filters. These
4
can be either attached with the sup-
plied straps or directly to the tube.
4 4
Flat ceiling tubes have small bent
ends and are intended for hanging
up lamps.
Each assembly kit includes a floor
4
tray. Unfold it completely and spread
it on the floor of the tent.
The floor tray has adhesive straps on
the corners. Use them to fasten the
Unzip all zippers of the tent cover all the way.
floor tray on the vertical tubes.
They can be attached from the out-
First Gently pull up the top of tent shell on the frame
side or inside. Thus a major part of
make sure all corners are squarely in place.
the light is blocked. Air can still flow
Having a helper makes this process easier.
inside.
s of the tent cover all the way.
up the top of tent shell on the frame
8
orners are squarely in place.
makes this process easier.
4 4
4
4
4
4
4
4
Then pull the bottom of tent shell to cover
the base of tent frame propertly.
Put all hanging bars on the top of frame.
Then pull the bottom of tent shell to cove
the base of tent frame propertly.
Put all hanging bars on the top of frame.
G