ENG
SNOOZE SETTING
• When alarms, press SNZ to stop the alarm and turn on the snooze at the same
time with an interval of 8 minutes; press any other key to turn off the alarm and
no alarm in the same day.
3. Temperature
• Press UP then MAX history records of indoor and outdoor temperatures displayed:
with MAX displayed on LCD, press SET to clear and display changes from MAX
to ---.- and come back to current temperature display after 15 seconds or press
UP twice to come back to the current temperatures.
• Press UP twice then MIN history records of indoor and outdoor temperatures
displayed: with "MIN" displayed on LCD, press SET to clear and display changes
from MIN to ---.- and come back to current temperatures after 15 seconds or
press UP to be back to current temperatures.
• Under normal time display mode, press DOWN to switch ºC/ºF unit.
NOTE! When temperature is higher than maximum testing scope, HH.H displayed;
when temperature is lower than the minimum testing scope, LL.L displayed.
4