Klarfit 10026908 Handbuch Seite 18

Stopping the Log
Switching between Screens
Press the right key once to switch between the screens. The following screens appear in the order
listed below:
Screen 1: Distance
The first screen shows the Distance, the Average Speed and the Duration of
training. Press the right key once to switch to the next screen.
Screen 2: Speed
As shown on the left screen, Speed is 0 km/h, Average Speed is 8 km/h
and Maximum Speed is 9.2 km/h. Press the right key once to switch to the
next screen.
Screen 3: Pace
As shown on the left screen, Pace is hours/km, Average Pace is 7.5
hours/km and Minimum Pace is 6.5 hours/km. Press the right key once to
switch to the next screen.
Screen 4: Altimeter
As shown on the left screen, Altitude is 60.3 m, Total Ascend is 8.4 and
Gradient is 0%. Press the right key once to switch to the next screen.
Screen 5: Calories
As shown on the left screen, Calories consumed is 57.1, Steps are 25
and Temperature is 28°C. Press the right key once to switch to the next screen.
Screen 6.1: Map
A POI has been selected. As shown on the left screen, the object is moving. To
scale the map press and hold the right key for 2-3 seconds to enter the Map
Scale.
Select „Stop Log" and press and hold the right key for 2-3 seconds to en-
ter Stop Log setup. The screen switches to the main menu and the Jogging
Mode sign and GPS sign will disappear.
18