Installation; Output Connections - Rega Apollo Bedienungsanleitung

English

installation

Ensure the operating voltage of the Apollo (stated on the rear) is the same as that of your
local power supply.
The Apollo will work well on most surfaces, such as a shelf, table, stand or wall bracket.
The Apollo should be placed to allow adequate access to the lid and aperture. If access is
limited, there is a danger of scratching the CD when placing it on the ball chuck system.
interconnects
A standard interconnect provides entirely satisfactory performance for the Apollo
CD player.
Audiophiles may wish to upgrade to a more exotic interconnect at a later stage, such as
Rega's Couple 2.

output connections

Outputs are made via RCA (Phono) type connector and the 'Toslink' optical connection.
The sockets on the Rega products are clearly marked to help identify them.
Line Out: For output to an audio amplifier.
Right: Always the lower row and marked in RED.
Left: Always the upper row and marked in WHITE.
! CAUTION: SOME AMPLIFIERS AND INTERCONNECTS HAVE BLACK COLOUR
CODING FOR THE LEFT CHANNEL !
Digital Out: For output to digital components such as DAC, PC or Bluetooth transmitter.
Always check that the connecting component is compatible with 44.1k coaxial S/PDIF input.
IMPORTANT: ALWAYS TURN OFF THE PLAYER WHEN CHANGING LEADS.
6