WAGNER Renuvo Handbuch Seite 18

GB
•
Pull out the tube (fig. 15, a) and rinse it well (you
do not have to take the tube apart to do this).
•
Using a soft brush and detergent, wipe away and
remains of the material from the valve (fig. 16, b).
Important: Do not remove the valve for cleaning.
If the valve is incorrectly re-attached, the material
cannot flow out of the container.
•
Allow the cleaning agent to flow through the
valve, pressing the cross-shaped valve button (fig.
17, c).
•
Put the black tube back on the valve (fig. 18).
•
Wipe the inside of the container cap with a cloth.
•
Screw the container cap back on the container,
tightening it by hand. (Fig. 19).
•
Lubricate the O rings with a thin layer of
lubricant. (Fig. 20)
Allow the container to dry completely
i
before storing it away.
•
Re-insert the container.

16

Renuvo


b

c

a