Werbung
IMPORTANT - RETAIN FOR FUTURE
REFERENCE - READ CAREFULLY
Failure to follow these warnings and assembly directions could result in serious injury or death.
ATTENTION
EN
!
!
Warning: When the child is able to climb out of the cot, the cot shall no longer be used for that child!
Be aware of the risk of open fires and other sources of strong heat, such as electric bar fires, gas
fires, etc. in the near vicinity of the coat.
Warning: Do not leave anything in the cot or place the cot close to another product, which could
provide a foothold or present a danger of suffocation or strangulation, e.g. strings, blind/curtain cords,
etc.
Do not use the cot when any part is broken, torn or missing and use only the spare parts approved by
the manufacturer. Any replacement parts shall only be obtained from the distributor.
All assembly fittings shall always be correctly tightened and checked regulary. Retighten the fittings
as necessary.
Do not overtighten the screws.
The cot base is adjustable. The lowest position is the safest one! The base should always be used in
that possition as soon as the baby is old enough to sit up.
The maximum thickness of the mattress used for that cot is 100mm.
The mark on the cots side indicates the maximum
thickness of the mattress to be used with the cot.
Thickness of the mattress shall be such that the internal height (surface of the mattress to the upper
edge of the cot frame) is at least 500 mm in the lowest position of the cot base and at least 200 mm
in the highest position of the cot base.
Warning: Do not use more than one mattress in the cot.
Use the appropriate mattress for the cot! The length and width shall be such that the gap between
the mattress and the sides and ends does not exceed 30 mm.
Do not use water mattress for this crib.
To prevent unauthorized opening size, remove all 3 removable side bars, when needed. Please be
sure that the springs mounted to the top.
Cleaning: Wipe with a soft cotton cloth moistened with water. Do not use abrasives.
Meets the requirements of EN 716-1:2017, EN 716-2:2017
Werbung
