Specification - Canary pro II Bedienungsanleitung

To turn on / off anonymous display: Press 16 times the MODE
button. Display shows 'Code' and two values. Again press the
MODE button until the left value shows 10. Allow 20 seconds
after the new values are set. Now the display only shows the
number of days measured. By pressing MODE once, the long
term average is also shown. To restore ordinary display press 16
times the MODE button (display shows 'Code' and two values).
Again press the MODE button until the left value shows 2. Allow
20 seconds after the new values are set.
RESPONSiBiLiTY
The monitor and the batteries must not be disposed of as
ordinary household waste. The materials used in Canary can
be recycled. It is the user's environmental responsibility to
ensure that electronic equipment and batteries are disposed
of in accordance with national regulations. Users should con-
tact the seller or their local authority for information about
environmentally friendly waste disposal.
Canary has a 2-year warranty against system failure. In the
event of incorrect use or operation of the monitor, Corentium
AS cannot be held responsible for any losses resulting from
failure or from the loss of measurement data.
8

SPECiFiCATiON

Sampling Method
Detection Method
Power Supply
Power Consumption
Dimensions
Weight
Operation Environment
Temperature
Relative Humidity
Measurement Range
Lower detection limit
Upper display limit
Precision (at 100 Bq/m³)
7 days
Long term
Accuracy
Internal memory
storage capacity
Passive radon diffusion chamber
Alpha spectrometry
3 AAA alkaline battery (LR03)
3 years battery life-time
< 250μW
120mm × 69mm × 25.5mm
130 grams (incl. batteries)
0 °C to +40 °C
< 95%
0 Bq/m³
9999 Bq/m³
20%
10% after 1 month
5% ± 5 Bq/m³
10 years
at 1h time resolution
9