Hydor Smartwave Bedienungsanleitung Seite 6

description
System ON-OFF switch
A.
Program selection knob: alternate, synchronous, food mode
B.
ON-OFF time selection knob
C.
LEDs indicating pump functioning
D.
LED indicating system is ON
E.
Pump/s connection channels
F.
Electrical Supply cable
G.
Hanging eyelet
H.
safety information
attention: before operating this system please verify that all components are
undamaged especially the cord.
Before any kind of intervention, ALWAYS disconnect electrical supply of any appliance
•
placed in the water.
Be sure that the voltage of the mains supply corresponds to the voltage shown on
•
the unit's label.
The cord of this product cannot be replaced or repaired;
•
In case of damage the entire unit must be substituted.
•
Do not cut or pull on the electrical cord.
•
Always disconnect from mains gently and make sure hands are dry
•
To prevent any accidental electric shock keep all connections dry
•
Make sure the plug is clean and free of any humidity, moisture and/or calcium/salt deposits
•
Please keep these instructions in a safe and dry place.
•
6 English