Pairing Bluetooth With Your Mobile Phone; Playing Music From Your Mobile Phone; Display Modes; Device List - Connect To The Paired Device - PERFECTPRO power player Bedienungsanleitung

Bluetooth is a short-range radio communication system and generally Bluetooth devices
can communicate with each other clearly within a regular sized room or office. The
reliability of a Bluetooth connection between different rooms will greatly depend upon
the construction of the building.
Bluetooth communication range may be substantially reduced if the signal passes
through a solid object. Human bodies, brick and concrete walls, heavy furniture or
bookcases will all reduce the operational range of your Bluetooth devices to a greater
or lesser extent. Glass, dry-wall or wood panelled walls and office partitions may have
a less severe but noticeable effect. Metal pipes, foil-lined plasterboard, metal window
frames and domestic wiring can also have an effect. You should position your Bluetooth
devices closer to each other if you observe communication difficulties.
WiFi networks and cordless phones generally use similar radio frequencies to Bluetooth
and may interfere with one another. If any interference is noticed, then try relocating the
Powerplayer or one of the other devices.
The Bluetooth capabilities of your Powerplayer enable it to receive audio from many
Bluetooth capable devices including mobile phones, personal computers and tablets.
Only one Bluetooth device can be connected to your Powerplayer at a time. It supports
the following Bluetooth profiles and functionality.
• Your Powerplayer supports A2DP (Advanced Audio Distribution Profile) which
is a audio connection that streams music from PCs, mobile phones etc. SBC and
AAC audio codecs are supported.
• Your Powerplayer supports AVRCP (Audio Video Remote Control Profile) that
allows your radio to control music playback from the connected device.
Note: Some mobile phones may temporarily disconnect from your Powerplayer when
you make or receive calls. Some devices may temporarily mute their Bluetooth audio
streaming when they receive text messages, emails or for other reasons unrelated to
audio streaming. Such behaviour is a function of the connected device and does not
indicate a fault with your Powerplayer.

Pairing Bluetooth with your mobile phone

1. Press the Power button to turn on the radio.
2. Select Bluetooth mode by pressing the Source button.
3. The LCD display will show "Pairing" when radio is not yet paired with your mobile
phone.
4. In your mobile phone open the Setting menu and select Bluetooth, then select
"Powerplayer" in the Bluetooth devices list (Bluetooth pairing instructions may vary
per type of mobile phone, please check your mobile phone manual).
5. When Bluetooth pairing is successful, the LCD display will show "Connected".
6. After that, the LCD display will show the connected mobile phone's name to indicate
the connected device to the radio.
17

Playing music from your mobile phone

1. Press the Power button to turn on the radio.
2. Select Bluetooth mode by pressing the Source button.
3. Start playing music by using the media players in the paired mobile phone.
4. Playback can be controlled from the mobile phone or by pressing the
buttons (preset buttons 3, 4 and 5) on the radio.
5. After music playback started, the name of the song will be displayed in the LCD.

Display modes

In Bluetooth mode, the radio can display a range of information of the current playing
music on the display. Press the Info button to cycle through the various types.
a. Title Displays scrolling song's name of the current playback music.
b. Artist Displays the artist's name of the current playback music.
c. Album Displays the album name of current playback music.
Device List – Connect to the paired device
In the Powerplayer, you can select the Bluetooth device from the device list to connect
again. The device names would be shown if the name of the Bluetooth devices were
configured in the mobile devices. Please refer to the user manual of your mobile device
for the configurations.
The device lists can be checked as below:
1. In Bluetooth mode, press the Menu button to enter the system setting.
2. Rotate the Tuning / Select knob until "View details" is displayed; press the Tuning
/ Select knob to select the setting.
3. Rotate the Tuning / Select knob until "Paired Device List" is displayed; press the
Tuning / Select knob to select the setting.
4. Rotate the Tuning / Select knob to view the name of the devices.
5. Press the Tuning / Select knob to start Bluetooth reconnection. The Powerplayer
will automatically connect to this mobile device.
Note: There can be up to 8 device names to be stored in the Powerplayer. If there are
more than 8 mobile devices have been connected and stored into the Powerplayer, the
earliest paired device name will be erased.
Note: If you have ever deleted the "Powerplayer" from your connected mobile device,
the auto reconnection will be unsuccessful.

Restart Bluetooth pairing

The Bluetooth function can be set to operate in different ways as below:
1. In Bluetooth mode, press the Menu button to enter the system setting.
2. Rotate the Tuning / Select knob to select "Bluetooth Discoverable" option and
press the Tuning / Select knob to select the setting.
, , and
GB
GB
18