Herunterladen Inhalt Inhalt Diese Seite drucken
Inhaltsverzeichnis
Verfügbare Sprachen
  • DE

Verfügbare Sprachen

1. Introduction & Features
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm
the environment.
Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialised
company for recycling.
This device should be returned to your distributor or to a local recycling service.
Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for buying the LPTDX626! Please read the manual carefully before bringing this device into service.
This powerful and versatile device features 6 channels and is equipped with DMX control, a dual signal input and a
preheating function. The device accepts any kind of mains supply thanks to the automatic frequency tracking
function.
Check carefully that there is no damage caused by transportation. Should there be any, consult your dealer and don't
install this device.
2. Safety Instructions
Be very careful during the installation: touching live wires can cause life-threatening electroshocks.
Do not touch the device during operation as the housing heats up.
Keep this device away from rain and moisture.
Unplug the mains lead before opening the housing.
• A qualified technician should install and service this device.
• Damage caused by disregarding certain guidelines in this manual is not covered by the warranty and the dealer
will not accept responsibility for the ensuing defects or problems.
• Do not switch the device on immediately if it has been exposed to changes in temperature. Protect the device
against damage by leaving it switched off until it has reached room temperature.
• This device falls under protection class I. It is essential, therefore, that the device be earthed. Have this device
installed by a qualified technician.
• Make sure that the available voltage does not exceed the voltage stated in the specifications of this manual.
• Do not crimp the power cord and protect it against damage from sharp edges. Ask an authorised dealer to replace
the cord if necessary.
• Always disconnect the device from the mains when it is not in use or when you wish to clean it. Only handle the
power cord by the plug. Never pull out the plug by tugging the power cord.
• Do not look directly into the light source as sensitive people may go into epileptic seizure if they do.
• Note that damage caused by user modifications to the device are not covered by the warranty. Keep the device
away from children and unauthorised users.
LPTDX626
LPTDX626 – 6-CHANNEL DIMMER PACK
1
VELLEMAN
Inhaltsverzeichnis
loading

Inhaltszusammenfassung für Lite-Puter LPTDX626

  • Seite 16: Limpieza Y Mantenimiento

    45°C Humedad 40% ~ 80% Se pueden modificar las especificaciones y el contenido de este manual sin previo aviso. LPTDX626 – 6-KANAL-LICHTENDSTUFE 1. Einführung & Eigenschaften An alle Einwohner der Europäischen Union Wichtige Umweltinformationen über dieses Produkt Dieses Symbol auf dem Produkt oder der Verpackung zeigt an, dass die Entsorgung dieses Produktes nach seinem Lebenszyklus der Umwelt Schaden zufügen kann.
  • Seite 17: Sicherheitsvorschriften

    Gerät nur für Anwendungen in dieser Bedienungsanleitung beschrieben, sonst kann dies zu Schäden am Produkt führen und erlischt der Garantieanspruch. Jede andere Verwendung ist mit Gefahren wie Kurzschluss, Brandwunden, elektrischem Schlag, Lampenexplosion, usw. verbunden Der Garantieanspruch erlischt bei unsachgemäßem Gebrauch. LPTDX626 VELLEMAN...
  • Seite 18 [▲]: gehen Sie eine Nummer vorwärts bis Kanal 512. [▼]: gehen Sie eine Nummer zurück bis Kanal 1. HINWEIS: Die LPTDX626 ist ein 6-Kanal-Dimmerpack. Wenn Sie das Gerät einstellen auf: - d.001: Ausgang ist 1 > Kanal 6. - d.007: Ausgang ist 7 > Kanal 12.
  • Seite 19: Wartung Und Pflege

    3. Die Versorgungskabel dürfen nicht beschädigt sein. Lassen Sie das Gerät durch einen qualifizierten Techniker installieren. 4. Trennen Sie das Gerät vor der Wartung vom Netz. 5. Reinigen Sie das Gerät regelmäßig mit einem feuchten, flusenfreien Tuch. Verwenden Sie keinen Alkohol oder Lösungsmittel. 6. Bestellen Sie Ersatzteile bei Ihrem Vertragshändler. LPTDX626 VELLEMAN...
  • Seite 20: Technische Daten

    5-poliger XLR, RJ11-Anschluss Analoger Eingangskanal Stromversorgung DC 0-10V Analoge Eingangskanäle 9 Kanäle Analoger Signalanschluss 9-poliger Anschluss D-Typ Abmessungen 482 x 88 x 300mm Gewicht Max. Umgebungstemperatur 35°C Max. Temperatur bei Rackmontage 45°C Feuchtigkeitsgrad 40% ~ 80% Alle Änderungen vorbehalten. LPTDX626 VELLEMAN...

Inhaltsverzeichnis