Start-Type "Start Button - Kärcher CR 114 Betriebsanleitung

CR 114
B Operating procedures
Hello. Thank you for
using this system.
We'll make sure your
car is really clean.
Please insert
a wash card.
Please enter the
first figure
of the code
Programme No.XX
Please wait...
Programme No.XX
Please go forward
Please drive
forward
Please reverse
To start the wash
press the
START button
Programme No.XX
Please wait...
5.959-363 F 00499 (01/00)
Operating Instructions
B.5.6 Start-type "Start button"
the vehicle to be washed stops in front of the washing
unit. The traffic light shows the signal to stop.
The driver goes to the code terminal and enters the code.
The unit makes preparations for the wash.
The preparations are complete. The traffic light shows the
signal to drive forward. The vehicle is driven into the unit.
The vehicle is positioned in the washing unit. If the unit
requires a correction of the vehicle position via the traffic
light, one of the adjacent messages appears in the dis-
play.
At correct positioning, the traffic light shows the stop
signal.
The driver leaves the vehicle for the second time and
presses the start button as prompted by the code
terminal.
The washing process then starts.
English
B6