Installation - Natec Genesis CX33 Bedienungsanleitung

GENESIS CX33 – USER MANUAL - EN
I. KEYBOARD

INSTALLATION

1. Connect keyboard to the USB port, for first time usage wait around 15 seconds
until drivers will be installed.
2. Keyboard is ready for use.
II. MOUSE
INSTALLATION
1. Connect mouse to the USB port, for first time usage wait around 15 seconds
until drivers will be installed.
2. To set the programmable buttons and DPI settings you need to download and
install the latest software version from our website www.genesis-zone.com,
3. Open the installation folder, double click the icon setup.exe.
4. Follow the instruction to install the program.
5. When the installation has been completed successfully the icon at taskbar will
be displayed.
6.
Double click the icon to pop up setting interface
BASIC SETTINGS
Basic settings tab allows you to assign individual functions to each button.
1. Each button can be set individually by click on list of programmable buttons,
after this action the pop-up window will show available functions which can be
selected by left click.
Select required function and click "Apply" to save the settings.
2.
.
2