Settings; Selecting A Language; On/Off Mode - DELTA DORE TYPHONE 3 SV Bedienungsanleitung

4

SETTINGS

Selecting a language

1) Press for approximately 5 sec. until the LED begins to flash.
2) Press , or
Key LED 1 on = French
LED 1 flashing = English
Key LED 2 on = Spanish
LED 2 flashing = Italian
Key LED 3 on = German
Using the access code?
Access to the device may be secured via a code.
The code is printed on the TYPHONE 3 SV's front panel.
Press briefly to enable the code function.
Using the TYPHONE 3 SV
5

ON/OFF MODE

Phone
rings
(6 to 7 times)
Dial subscriber
number
Select control
1, 2 or 3
or hang up !
- When the wrong code is entered, a "Wrong code" message is heard.
The device hangs up after three unsuccessful attempts at entering the code.
- TYPHONE 3 SV automatically hangs up after 35 sec. if no button is pressed
- You have up to 3 minutes to complete the sequence
- Press keys only when voice synthesiser is silent
(DEVICE CONTROL PANEL)
once or twice to select language
Hello !
TYPHONE 3 SV
connects
1
Press the control
number required
(e.g. control n°1)
Select another control
- 12 -
LED on = code enabled
LED off = code disabled
No code
Pin-in
Code
secret
entry
code
Control n°1
is turned off
(example)
1 2 3 4
Pin-in your
4-digit code
Control n°1
is turned on
Press
to modify