Herunterladen Inhalt Inhalt Diese Seite drucken

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Rotator
STR4
Instructions for use
Bedienungsanweisung
Version 1.0

Werbung

Inhaltsverzeichnis
loading

Inhaltszusammenfassung für Stuart STR4

  • Seite 1 Rotator STR4 Instructions for use Bedienungsanweisung Version 1.0...
  • Seite 2 Mains On/Off Fig. 1: STR4 Drive unit Rotator Introduction Thank you for purchasing this piece of Stuart STR4 equipment. To get the best performance from Instructions for use the equipment and for your own safety, please read these instructions carefully before use.
  • Seite 3: Electrical Installation

    Supply requirements Power STR4 230V, 50Hz The STR4 is a drive unit with variable speed control that can be set between 6 and 60rpm. The STR4 is supplied with two mains leads For added convenience it also has an analogue fitted with IEC plugs for connection to the timer that can be set from 10 to 60 minutes.
  • Seite 4 Fig. 3: STR4/2 STR4/3: Designed to hold a single vessel at a 45º angle so that it is rolled and turned end-over-end at the same time, resulting in a vigorous figure of 8 mixing action.
  • Seite 5: Maintenance & Servicing

    E-mail: service@bibby-scientific.com Warranty Tel: +44 (0)1785 810475 Fax: +44 (0)1785 810471 Stuart warrants this equipment to be free from defects in material and workmanship, when Only spare parts supplied or specified by used under normal laboratory conditions, for Stuart or its agents should be used. Fitting a period of three (3) years.
  • Seite 6: Technical Specification

    Technical Specification STR4 Rotation speed 6 to 60rpm Timer 10 to 60 minutes or continuous Maximum load Power 230V, 50/60Hz Dimensions (w x d x h) mm 650 x 250 x 250mm Net weight 6.4kg Electrical supply 230V, 50Hz, 50W...
  • Seite 7 Motor Ein/Aus Abb. 1: STR4 Drive unit Antriebseinheit Rotator Einführung STR4 Vielen Dank, dass Sie sich für dieses Stuart- Bedienungsanweisung Gerät entschieden haben. Lesen Sie bitte vor Verwendung des Geräts gründlich diese Gebrauchsanweisung, um das Potenzial des Geräts optimal nutzen zu können und Ihre eigene Sicherheit zu gewährleisten.
  • Seite 8: Elektrische Installation

    Allgemeine Beschreibung Modell Spannungsversorgung Spannungsversorgung STR4 230V, 50Hz Der STR4 ist eine Antriebseinheit mit variabler Der STR4 ist mit zwei Netzkabeln mit Drehzahlregelung zwischen 6 und 60 U/Min. Die IEC-Steckern für den Anschluss an das Bedienung wird durch eine analoge Zeitschaltuhr Gerät ausgestattet.
  • Seite 9 Abb. 3: STR4/2 8. Um die Dauer eines Mischvorgangs festzulegen, den Knopf der Zeitschaltuhr auf STR4/3: Zur Aufnahme eines einzelnen Gefäßes die gewünschte Zeit in Minuten einstellen. Nach Ablauf der eingestellten Zeit stoppt der Rotator. in einem Winkel von 45º. Die gleichzeitige Rotation in 8er-Form und überkopf gewährleistet...
  • Seite 10: Wartung Und Service

    Stuart oder seinen Vertretern geliefert oder angegeben werden. Die Verwendung nicht genehmigter Teile kann Stuart garantiert, dass dieses Gerät frei von Material- und Herstellungsfehlern ist. Bei die Leistung der in das Gerät integrierten Einsatz unter normalen Laborbedingungen wird Sicherheitseinrichtungen beeinträchtigen.
  • Seite 11: Technische Daten

    Technische Daten STR4 Rotationsgeschwindigkeit 6 bis 60 U/Min Zeitschaltuhr 10 bis 60 Minuten oder Dauerbetrieb Maximale Last Abmessungen (B x T x H) 650 x 250 x 250mm Nettogewicht 6.4kg Stromversorgung 230V, 50Hz, 50W...
  • Seite 12 This product meets the applicable and so we cannot guarantee that interference EC harmonized standards for radio will not occur in practice. Where there is a frequency interference and may be possibility that injury, damage or loss might occur expected not to interfere with, or be affected if equipment malfunctions due to radio frequency by, other equipment with similar qualifications.
  • Seite 13 INSPECTION REPORT MODEL SRT4 ELECTRICAL SAFETY 1. Earth continuity 2. Insulation 3. Flash test FUNCTIONAL 1. Indicators 2. Speed/temperature 3. Visual acceptance QUALITY CONTROL INSPECTOR...
  • Seite 14 Thank you for reading this data sheet. For pricing or for further information, please contact us at our UK Office, using the details below. UK Office Keison Products, P.O. Box 2124, Chelmsford, Essex, CM1 3UP, England. Tel: +44 (0)330 088 0560 Fax: +44 (0)1245 808399 Email: sales@keison.co.uk...

Inhaltsverzeichnis