Konftel Unite Adapter Bedienungsanleitung Seite 11

USING WITH KONFTEL UNITE
The device name displayed is the name shown on the screen of that conference phone.
(This text can be altered. Please refer to the manual for your conference phone.)
When you select the conference phone that you want to connect, a pairing code will be
displayed. Enter the code via the keypad on the conference phone and press OK.
Pairing will then start. When the devices are paired, the Unite connection symbol will be
displayed in Konftel Unite and on the conference phone's display screen.
Konftel Unite and the conference phone will remain paired while they are close to one
another and are being used. A connection breaks after 5 minutes of inactivity, i.e. when
no call is being held. The connection range is up to 20 metres, approximately, depending
on the setting. The connection breaks if this range is exceeded.
You will be asked to reconnect when Konftel Unite next comes within range of the
conference phone. One touch is all it takes to reconnect.
You can disconnect manually via the conference phone and the app.
From conference phone:
Select: MENU > UNITE > DISCONNECT > confirm with OK.

From Konftel Unite:
Click on the Unite connection symbol in the upper left-hand corner of the screen and
select disconnect from the highlighted device.
Up to 100 mobile phones or tablets can be paired with a conference phone. Note

however: Only one user at a time can be actively connected to the conference phone!
The number of paired mobile devices is displayed under the status menu in the
conference phone.
Select: MENY > UNITE > STATUS.

The pairing can be deleted from the conference phone by selecting.
Select: MENU > UNITE > ERASE DEVICE or ERASE ALL.

Symbol for Unite connection
11