Pull-Out Display; Weight Capacity Indicator; Low Battery Indicator - Sunartis ME315 Benutzerhandbuch

3. Repeat step 2 until all ingredients have been weighed in the container.
NOTE: There are two ways to set the scale at "0" when weighing ingredients in a
container.
1. Place the container on the weighing plate before turning ON the unit.
2. If the scale is already ON, place the container on the weighing plate and tap the
ON/OFF touch field, which will revert the scale to 0" (for g) or "00" (for lb. and
oz.) or 0 (for ml) or 0.00 (for fl oz).

5. PULL-OUT DISPLAY

The display unit can be pulled away from the scale for better visibility, if it is
obstructed by a large bowl, pan, plate etc.
To retract, simply replace the display unit and magnets will secure it in place.

6. WEIGHT CAPACITY INDICATOR

The weight capacity indicator shows the used capacity if the scale between 0 and 10
kg (or 0 and 10 l or 0 and 22 lb, or 0 and 352 fl oz). When maximum capacity is
reached, "o-Ld" (overload) will appear on the display. To protect the scale, remove
excess weight immediately.

7. LOW BATTERY INDICATOR

1. If the battery symbol appears on the display, it's recommended to replace with
new batteries to ensure optimum accuracy of the scale.
2. If the display shows 'Lo' (low battery) and shuts off automatically, please replace
the batteries immediately.
How to install/change batteries:
Warning: batteries may pose a choking hazard. Do not let children handle
batteries.
This item uses 4x AAA 1.5 V LR03 batteries. In order to ensure proper performance,
be sure to replace batteries as a simultaneous set. Batteries should be removed from
the scale, if consumed or if the product is to be left unused for duration of time. It is
10