Bayan Audio StreamPort Universal Gebrauchsanweisung Seite 3

Setting up the Bayan Audio StreamPort Universal:
Connect the USB power cable to the StreamPort Universal
º
Plug the USB power cable into the USB socket on your HiFi / Audio System OR plug it into the supplied AC mains
º
power adapter, and plug this into a mains outlet.
Connect the StreamPort Universal to your powered speakers, amplifier or AV receiver using the supplied 3.5mm
º
audio cable or Stereo RCA cable (ensuring that you plug the StreamPort Universal into an audio INPUT on your hifi
system, and not into an output such as the headphone socket or tape loop output)
Select the relevant input on your hifi system or audio docking system.
º
Pairing the StreamPort Universal with your Bluetooth audio source (MP3, SmartPhone,
Tablet or Laptop):
Connect by NFC – Automatic pairing
If your audio source supports NFC, you can use NFC Secure Simple Pairing to connect your phone to the
StreamPort Universal*:
Turn on your audio source and unlock the screen.
º
Ensure that NFC is enabled in the settings on your audio source.
º
Press and hold down the pairing button on your StreamPort for 8 (eight) seconds to power it on and enter pairing
º
mode. (The Blue LED will flash once per second).
Touch the back of your audio source to the top of the StreamPort Universal – you will be asked to confirm that you
º
wish to connect and pair with the StreamPort Universal – select Yes/OK.
You can disconnect by simply touching your audio source again to the top of the StreamPort Universal.
º
Connect by traditional Bluetooth Pairing:
If your audio source does not support NFC but is Bluetooth enabled, you can use Bluetooth Secure Simple Paring to
connect and stream music:
Ensure that the StreamPort Universal is turned off (the power LED is not illuminated).
º
Press and hold down the pairing button on your StreamPort. For 8 (eight) seconds to power it on and enter pairing
º
mode. (The Blue LED will flash once per second).
Consult your audio source user manual for instructions on how to pair with Bluetooth devices – generally you will
º
need to go into your settings, Bluetooth, scan for new Bluetooth devices and select 'StreamPort Universal' You will
not be prompted for a passcode for pairing.
Notes:
For secure simple pairing to work your MP3 /phone / tablet / laptop must be in close proximity to
º
English