General Directions For Use; Main Components - Qlima R 8128S C Gebrauchsanweisung

GENERAL DIRECTIONS FOR USE

Below you will find the main steps to be taken for
using your heater. For more details, please refer to
the MANUAL (pages 67 ff.).
1
Remove all packaging materials (refer to Section A, Fig. A).
2
Fill the removable tank I and wait 30 minutes before you
ignite the heater (refer to Section B, Fig. I).
3
Insert the batteries into the battery holder K
(refer to Section A, Fig. G).
4
Check whether the combustion chamber D is fully upright
(refer to Section A, Fig. F).
5
Ignite the heater by turning the knurled wick adjustment
knob B as far to the right as possible and then gently push the
ignition button C (refer to Section C, Fig. K and L).
6
After igniting the heater it will take 10 to 15 minutes before
you can check if the heater burns well (refer to Section D).
7
Switch off the heater (refer to Section E).
•
As a fire precaution, the tank must be filled
either when the heater has been switched off or
in another room than the room where the heater
is installed.
•
Store all fuel containers with their original caps
and seals in a cool and dark place.
•
Fuel ages. Use new fuel at the start of every
heating season.
•
The use of Qlima Premium Quality Fuels as a
heating fuel assures you that you have a good
quality fuel.
•
Before changing brands and/or types of fuel
make sure that the mobile heater first completely
empties all of the remaining fuel inside the
heater.

MAIN COMPONENTS

A OFF - button
B Knurled wick
adjustment knob
C
Ignition button
4 Combustion
chamber
E Combustion
chamber handle
F Fuel indicator
G Grill
H Lid for removable
tank
I
Removable tank
J Fuel gauge
removable tank
K Battery holder
L Handle
 Cabinet
 Air quality control
system
4
65
R 125 E 1998 / 1999