Technical Specification; Electrical Wiring - Caterlite CK649 Bedienungsanleitung

Telephone Helpline: 0845 146 2887 (United Kingdom)
Troubleshooting
If your Caterlite appliance develops a fault, please check the following table before making a call to the
Helpline.
Fault
The unit is not working
Steam leaks from the seal
Beeper sounds, LCD shows l_ _l
in display and Empty LED
illuminated

Technical Specification

Model Voltage
CK649 230V 50Hz

Electrical Wiring

This appliance is supplied with a 3 pin, moulded, BS1363 plug and lead, with a 13 amp fuse as standard.
The plug is to be connected to a suitable mains socket.
This appliance is wired as follows:
• Live wire (coloured brown) to terminal marked L
• Neutral wire (coloured blue) to terminal marked N
• Earth wire (coloured green/yellow) to terminal marked E
This appliance must be earthed, using a dedicated earthing circuit.
If in doubt consult a qualified electrician.
Electrical isolation points must be kept clear of any obstructions. In the event of any emergency
disconnection being required they must be readily accessible.
Probable Cause
The unit is not switched on
Plug and lead are damaged
Fuse in the plug has blown
Power supply
Internal wiring fault
Seal worn
No Water
Water level below add water
indicator but water still boiling
Lid not secured properly
Power Current
680W 3A
Action
Check the unit is plugged in correctly
and switched on
Call Caterlite agent or qualified
technician
Replace the plug fuse
Check power supply
Call Caterlite agent or qualified
technician
Call Caterlite agent or qualified
technician
Switch of unit and allow to cool. Add
water.
Switch of unit and allow to cool. Add
water
Switch of unit and allow to cool.
Secure lid correctly.
Dimensions
Capacity
h x w x d (mm)
5 litres 395 x 230 x 300
UK
Weight
(kg)
2.5
4