Chess960 Position Functions; Adjusting The Contrast; Technical Specifications - DGT 960 Gebrauchsanweisung

10. Chess960 position functions

960
With the
chess960 part of the display any moment
When you push the
running, the dice-symbol will start to blink. Now you can:
- Let the timer choose a random start position by
pushing the
start position will be displayed as well as the
position of the chess pieces for this number.
- Choose with the
the position number to make it blink. With the
or button you can change that digit and in this
way you can set a specific position number with all
three digits. The corresponding position of the
chess pieces will be shown immediately.
- You can select one of the chess pieces with the
and/or the
piece by pushing the
pieces on the right side of the changed piece will
be deleted. Choose the next piece with the
button and choose one with the
When all positions are filled in, the corresponding
chess960 number will be displayed.
When you push the
part of the display will be hidden and you can go on with
the timer functions. However if you push Start/Stop
button the chess960 functions will remain visible and
you can set the timer functions then.

11. Adjusting the contrast

When the time is not running, you can adjust the contrast
of the display. Press and hold the sound button
simultaneously push one or more times the
button to increase or to decrease the display contrast.
This setting will be kept after switching off the clock until
you remove the battery.

12. Technical specifications

Batteries:
Service life:
Accuracy:
button you can hide or display the
960
button while the clock is not
or button. The number of the
and/or the
button. You can choose a different
or
960
button again, the chess960
Button cell battery CR2032 (3V).
Turned on with an average use of
the sound signal: 4 years.
Switched off 6 years.
Better than one second per hour.
button a digit of
button, all the
or button.
and
or
7