Operation - Sinmag Europe SM-10LS Handbuch

ENG

5. OPERATION

Before starting to operate the machine, the bowl has to be inserted correctly into the
arms of the machine and it should be fixed with the vanes. The tool itself (the whip, flat
beater or hook) also has to be fixed correctly into the machine's head.
The bowl then has to be raised by means of the handle, this handle will experience
some resistance before it can be fixed in its position.
Start button
Setting button for gears
You will have to lower the safety grid and lift bowl before you will be able to start the
machine. You should also see to it that the emergency stop is not pushed in. The ma-
chine will not start if the left digital panel shows 'Err' and the right 'or'. this means that
the safety grid is raised, the bowl is not raised or the emergency stop is pushed in.
6
Gear indication Stop button
Setting button for timer
SINMAG EUROPE BVBA
Emergency stop