Inhaltsverzeichnis
Werbung
L
L
L
L
6a.
All dimensions in mm, not drawn on scale.
All dimensions in mm, not drawn on scale.
Drawing no.:
All dimensions in mm, not drawn on scale.
All dimensions in mm, not drawn on scale.
Tolerances:
Tolerances:
thickness: +/-0.2mm
thickness: +/-0.2mm
length and width: +/-0.5mm
length and width: +/-0.5mm
thickness: +/-0.2mm
thickness: +/-0.2mm
squareness: +/-0.3mm
squareness: +/-0.3mm
groove width: +/- 0.25mm
groove width: +/- 0.25mm
squareness: +/-0.3mm
squareness: +/-0.3mm
groove depth: +/-0.5mm
groove depth: +/-0.5mm
groove position: +/-0.35mm
groove position: +/-0.35mm
SAP-Code:
groove depth: +/-0.5mm
groove depth: +/-0.5mm
drill hole depth: +/-0.5mm
drill hole depth: +/-0.5mm
drill hole diameter: +/-0.15mm
drill hole diameter: +/-0.15mm
L
L
drill hole depth: +/-0.5mm
drill hole depth: +/-0.5mm
drill hole position: +/-0.3mm
drill hole position: +/-0.3mm
dowel protrusion: +/-0.8mm
dowel protrusion: +/-0.8mm
drill hole position: +/-0.3mm
drill hole position: +/-0.3mm
6b.
Title:
Proprietary and Confidential: the information contained in this drawing is the sole property of Unilin, any
Proprietary and Confidential: the information contained in this drawing is the sole property of Unilin, any
reproduction in part or as a whole without the writtenpermission of Unilin is prohibited.
reproduction in part or as a whole without the writtenpermission of Unilin is prohibited.
L
L
L
L
6a.
Date: 06/05/2015
Date: 06/05/2015
Drawing no.:
Tolerances:
Tolerances:
length and width: +/-0.5mm
length and width: +/-0.5mm
groove width: +/- 0.25mm
groove width: +/- 0.25mm
LDM
groove position: +/-0.35mm
groove position: +/-0.35mm
L
SAP-Code:
L
drill hole diameter: +/-0.15mm
drill hole diameter: +/-0.15mm
dowel protrusion: +/-0.8mm
dowel protrusion: +/-0.8mm
6c.
All dimensions in mm, not drawn on scale.
All dimensions in mm, not drawn on scale.
Drawing no.:
All dimensions in mm, not drawn on scale.
All dimensions in mm, not drawn on scale.
Tolerances:
Tolerances:
thickness: +/-0.2mm
thickness: +/-0.2mm
length and width: +/-0.5mm
length and width: +/-0.5mm
thickness: +/-0.2mm
thickness: +/-0.2mm
squareness: +/-0.3mm
squareness: +/-0.3mm
groove width: +/- 0.25mm
groove width: +/- 0.25mm
squareness: +/-0.3mm
squareness: +/-0.3mm
groove depth: +/-0.5mm
groove depth: +/-0.5mm
groove position: +/-0.35mm
groove position: +/-0.35mm
SAP-Code:
groove depth: +/-0.5mm
groove depth: +/-0.5mm
drill hole depth: +/-0.5mm
drill hole depth: +/-0.5mm
drill hole diameter: +/-0.15mm
drill hole diameter: +/-0.15mm
drill hole depth: +/-0.5mm
drill hole depth: +/-0.5mm
drill hole position: +/-0.3mm
drill hole position: +/-0.3mm
dowel protrusion: +/-0.8mm
dowel protrusion: +/-0.8mm
drill hole position: +/-0.3mm
drill hole position: +/-0.3mm
L
Können zu abschließenden Dekorationszwecken
unbehandelte MDF-Platten verwendet werden?
Dies ist nicht empfehlenswert, da die Gefahr besteht, dass
Feuchtigkeit aufgrund der unbehandelten Oberfläche in die
Platte eindringt. Wenn die Tapete wasserundurchlässig ist,
besteht die Gefahr, dass die im Klebstoff enthaltene Feuchtigkeit
in die unbehandelte Platte eindringt. Es hängt daher von der Art
der Tapete ab und insbesondere auch von dem verwendeten
Klebstoff ab.
L
L
Date: 06/05/2015
Date: 06/05/2015
L
LDM
L
Date: 06/05/2015
Date: 06/05/2015
Drawing no.:
Tolerances:
Tolerances:
length and width: +/-0.5mm
length and width: +/-0.5mm
groove width: +/- 0.25mm
groove width: +/- 0.25mm
LDM
groove position: +/-0.35mm
groove position: +/-0.35mm
SAP-Code:
drill hole diameter: +/-0.15mm
drill hole diameter: +/-0.15mm
dowel protrusion: +/-0.8mm
dowel protrusion: +/-0.8mm
L
L
Date: 06/05/2015
Date: 06/05/2015
LDM
17
Werbung
Inhaltsverzeichnis
