axing BVS 13-69N Betriebsanleitung Seite 4

Field of application:
The devices are suited only for amplifying radio and television signals in the
house! If the device is used for other purposes, no warranty is given!
The illustration shows application examples for the distribution in star (1) and
tree structure (2).
RF Installation:
 Connect the input of the amplifier to the interconnection point. Connect the
output of the amplifier to your house distribution.
 Use a highly shielded coaxial cable with an F connector. Suitable cables and
connectors can be found in the current AXING catalogue or under www.
axing.com.
Equipotential bonding and Mounting:
To avoid dangerous overvoltages (attention: risk of fire/death), the devices
must be connected to the equipotential bonding according to EN 60728-11.
 Use the equipotential bonding connection attached to the device (3).
 To connect the outer conductor of the coaxial cable to the equipotential
bonding, use e.g. earth connection blocks CFA or earthing angles QEW at
the input and output of the amplifier.
 Use the mounting screws included in the delivery and the mounting holes
of the devices (4).
3
4
2
4
Adjustments:
 You can control the equalization and attenuation of the forward path with
the controllers (5) and (6).
 With the controller (7) you can control the attenuation of the return path.
1
5
6
7