Nowsonic Stage Router Bedienungsanleitung Seite 8

www.nowsonic.com
Windows Vista/7:
Click on Start and choose Control Panel > Network and Internet >
Network connection.
Right-click the Local Area Connection in the Network connection
screen and choose Properties.
Double-click the Internet-Protocol Version 4 (TCP/IPv4) entry in
the Local Area Connection Properties dialog.
Click the Obtain an IP address automatically and Obtain DNS
server address automatically check boxes in the Internet-Protocol
Version 4 (TCP/IPv4) Properties dialog.
Click OK and in the following dialog on Close.
Mac OS X 10.6 and higher:
Click on System Preferences > Network.
Click on the Ethernet entry from the Services list on the left.
Click the Advanced button in the corresponding dialog.
Click on the TCP/IP tab and choose the Using DHCP option from the
Configure IPv4 pop-up.
Click on the Renew DHCP Lease button.
When the IPv4 Address and the Router have been updated auto-
matically, click OK and close the settings dialog.
Configuring Stage Router
Stage Router is configured via a HTML Administrator Tool to work as
an access point. The tool can be opened via the browser on your host
computer. Proceed as follows to configure the Stage Router.
Open a web browser on your computer and type 192.168.1.1 in the
address field: this is the preset IP address which is printed on the rear
panel of Stage Router. Click Enter.
This will open the Nowsonic Stage Router web interface. Click the
Setup Tool button.
In the upcoming dialog, enter the user name and the password for
Stage Router and click Log In. You will find the information on the
rear panel of the device. The default values are:
user name: admin
password: admin
Now, the Administrator tool is displayed. If you want to connect to
the Internet via Stage Router, choose the Internet Setup entry.
9
Stage Router
GB
User manual