Installation Guidelines; Installation On An Eia Standard Rack Shelf Board - Pioneer NXS-GW Bedienungsanleitung

Installation guidelines

! Do not place this unit on objects radiating heat, such as an amplifier, or expose it to a spotlight for an extended period of time, as this may damage
this unit.
! Install this unit away from a tuner or a TV. Otherwise, image distortion or noise may result. Also, image distortion or noise can easily occur if an
indoor antenna is used. In such cases, use an outdoor antenna or turn off the power of this unit.
! Place this unit on a level surface and a stable platform.
! Do not place heavy objects on top of this unit.

Installation on an EIA standard rack shelf board

This unit is half the size of an EIA standard rack (1U). When mounting it on a rack, install it on general purpose rack mount shelf or the like. Holes (for
M3 meter screws 6 mm or less in length) for fixing this unit onto a mount shelf are provided on the bottom panel, as shown on the diagram below. Use
these holes to fix this unit by screw to the shelf. Note that this unit has a depth of 138.6 mm.
! Do not install this unit directly above a power amplifier. Heat radiating from the power amplifier may damage this unit. Also, noise (hum noise, etc.)
may be generated.
! When transporting this unit, remove it from the rack. Transporting this unit without removing it from the rack may damage this unit.
! If you transport this unit without removing it from the rack, make sure vibration or shock is not applied to this unit.
6
6
En
Do not allow contact with vibrating
surfaces.
Rack mount screw hole (M3)
To assure proper heatdissipation, be
sure to maintain this open space.
To assure proper
heatdissipation, be
sure to maintain
this open space.
Rack mount screw hole (M3)
198
To assure proper
heatdissipation, be
sure to maintain
this open space.
6
(unit:mm)