Ebode IP Vision 58 Bedienungsanleitung Seite 3

2. Set Contents
IP Camera
Power Supply
Network Cable
3. Setting up the device
Step 1: Hardware Installation
You need to set up your camera using a network cable (wired) first, before you can use it
wirelessly.
- Install the Wi-Fi antenna
- Plug the power adaptor into the camera and into an AC outlet.
- Plug one end of the network cable into the camera, and the other end into your
router/switch.
22-3-2012
Quick Setup Guide
CD
Mounting bracket
3 IP Vision 58