Wall Mounting; Cleaning And Storing - Wetelux 81 52 72 Bedienungsanleitung

Notes: This feature is only available in dark rooms. Under bright
conditions the lamp will not shine at all in both motion controlled
modes "AUTO-30S" or "AUTO-60S". Motion detection will not ac-
tivate the lamp in this case.
The max. range of the motion sensor depends on the ambient
temperature. In cold environments, the range is higher.

Wall Mounting

Hang the wall holder (2) with open end facing up on a nail or on
one or two screws on the wall.
After setting up the wall holder, insert the lamp from the top into
the holder.
You can remove the lamp quickly and easily from the wall holder
in case you want to exchange the batteries.
Note: Before installing the wall holder check the proper function-
ality and the field of view of the motion sensor. Select a suitable
place of installation in order to have the lamp activated in time
when passing the motion sensor.

Cleaning and Storing

Clean the unit only with a dry or lightly moistened cloth. Do not
use aggressive chemicals or abrasives for cleaning.
Do not immerse the unit in liquids of any kind.
Keep the opening of the brightness sensor (1) free from any
foreign objects and the motion sensor (4) clean at all times.
Store the unit indoors in a dry place that is protected from dust,
dirt and extreme temperatures.
Using
8