nohrd Bike Bedienungsanleitung Seite 35

Service / Parts: www.nohrd.com
Step 5
Take the planetary gear unit's solid wood rear cover (B) and attach
to the solid wood main frame, as pictured on left (5), with 4x flat-head
screws M6x25 (O) (2 screws / side) using a 4mm allen key (U).
Now tighten all 12 M6x25 flat-head screws (O) firmly.
Step 6
This step requires 2 x pedals (K), 2 x crank arms (right + left) (J),
2 x screws for the pedal unit (Q), as well as an 8mm allen key (R).
With a 6mm allen key (S), attach the left pedal to the left crank arm
and proceed accordingly on the right side.
The crank arms are marked with an "L" and "R".
Next, attach the crank arms (with pedals) to the planetary gear unit (E)
using 1x screw per side with an 8mm allen key (R).
Please note:
The crank arms must be mounted opposite each other.
35