5.8.1
Direct Channel Selection
Select the desired channel by using the keys
With each change of channel, an information window with information on the cur-
rent channel will be displayed:
No.
Description
1
Channel number of current channel in current channel list
2
Channel name of current channel
3
Date
4
Time
5
Name of next program
6
Name of current program
Press the INFO key to call this window at any time.
Set display time at OSD Timeout (see section 7.3.1.4, page 62).
Press EXIT two times to close the information window.
5.8.2
Channel Selection via Selection Window
1. Press the OK key to display a selection window with all available channels (3).
2. Select the channel list with the desired channel by using the keys /
/
(1)
or
Press the FAV key to select from your favorite lists (see p. 116).
Gecco DR12
/ PR+ and
/ PR-.
Basic Operation
or
105