Proxi Bulb Bedienungsanleitung Seite 8

Restoring the factory defaults:
Using a mobile application - for administrators only:
Tap the name of the device and then select: "Settings", "Factory Reset",
and "Reset". When you enter the administrator's password, the app-
liance returns to its default settings.
When use of a mobile application is not possible, or in case of loss of
the administrator's password:
1. If the default status after the power loss is set to "On", wait approx.
2 seconds between each step. For the other settings, wait approx.
5 seconds.
2. Disconnect the Proxi Bulb from the power supply, such as by remo-
ving it from the light fixture.
3. Connect the Proxi Bulb to the power supply (such as by fitting it to the
light fixture). When the light switches on automatically, immediately
disconnect the Bulb from the power supply.
4. After the specified time, reconnect the power supply to the Proxi
Bulb. If the Bulb lights up white entering a shade of blue, wait until the
illumination turns blue and then disconnect the Bulb from the power
supply. Otherwise, repeat the operations from step 2.
5. After the specified time, reconnect the power supply to the Proxi
Bulb. If the Bulb lights up white entering a shade of green, wait until
the illumination turns green and then disconnect the Bulb from the
power supply. Otherwise, repeat the operations from step 2.
8