Eurotops Sound Control Bedienungsanleitung Seite 7

FEATURES
 Time, month, date and temperature ℃/℉ display

12/24 hour switchover

3 daily alarms

Activate the LED display by sound

Power: 3 X AAA batteries (not included) or DC5V USB cable (included)
1 x CR2032 built-in battery
OPERATING
1. After inserting battery, LED turns on with Di sound and time will display.
2. Under any mode, press UP to switch dP-1, dP-2 and dP-3 mode.
dP-1: LED alternately display clock, date and temperature; clock display for 10 seconds, date and temperature display
for 2 seconds each
dP-2: Default clock display. Press "set" to select desired mode and keep it as display mode.
dP-3: Default clock display. No matter which mode it is, it will display time after 15 seconds.
3.Under any mode, long press DOWN to switch ℃/℉.
CLOCK SETTING
Under time mode: long press SET to enter following sequence:
12/24hr hour
DATE SETTING
Under time mode, press SET to enter date mode. Long press SET to enter following sequence:
Year month
ALARM SETTING
Under time mode, press SET twice to enter Alarm mode. Long press SET to enter following sequence:
--A1 Hour
TEMPERATURE SETTING
Wooden LED Alarm Clock "Sound Control"
Cat. No.: 29485
minute
1.
2.
3.
4.
date
1.
2.
3.
Minute
Press UP/DOWN to set the numbers and press "SET" to
confirm each setting.
Press and hold UP/DOWN to speed up the setting.
Exit automatically if no operation in 15 seconds.
Under 12Hr format, PM indicator on the left top corner will
appear in the afternoon.
Press up / down to set the numbers and press "SET" to confirm
each setting
Press and hold the UP/DOWN buttons to speed up the forward
or reverse scanning of the digits.
Exit automatically if no operation in 15 seconds.
Press up / down to set the numbers and press "SET" to
1.
confirm each setting
2. Follow step of A1 to set Al2/ A3.
3. Under alarm mode, press UP to turn on/ turn off the alarm
function.
4. When the alarm function is activated, it will show ONAL1/
ONAL2/ ONAL3. Symbol "." will show on the display
If the alarm function is off, it will shows –A1/ --A2 / --A3.
5.
Symbol "." Will disappear when all the 3 alarms are turn off.
6. Alarm will sound for about 1 minute. Press any button to stop
the alarm.
1. Temperature is automatically detected after power
on.
Under any mode, long press DOWN to switch ℃/℉.
2.
3. Under dP-1 mode, alternate display temperature for
2 seconds.
4. Under dP-2/dP-3 mode, press SET to switch to
temperature display.