Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
ASSEMBLY
1. Decide where to put your light. This light has been approved for use in the ground.
2. Dig a hole with a diameter of Ø10.25 cm and a depth of 13 cm.
3. Put the light into the ground, making sure it is stable. Connect the light to the Belys
transformer or another Belys product that is connected to the Belys system's
transformer. Check that the plug is correctly installed and that the cable does not move.
1
3
RIGHT OF COMPLAINT
By law the product must be returned to the place of purchase along with the original
receipt in the event of a complaint. The user is liable for any damage to the product that
is caused by not using the product for its intended purpose or by not following this user
manual correctly. The right of complaint will not apply in these instances.
INFORMATION ABOUT HAZARDOUS WASTE
Used products should be handled separately from
household waste. They should be taken for recycling in
accordance with local rules for waste management.
2
10,25 cm
TECHNICAL DATA
Voltage
12 V
Power
3 W
Safety class
III
IP code
IP 67
3
Werbung
Inhaltsverzeichnis
